Dial-Code Features - AT&T MLS-34D Quick Reference Manual

Feature
Description
Account Code Entry
Lets you enter a code of up to 16
digits for an incoming or outgoing call.
You may have to enter an account
code to access an outside line.
Background Music
Plays Music On Hold through the
speaker on your idle MLS-model
phone.
Call Coverage (PARTNER II only)
Redirects calls on owned line to
another extension for coverage. To
cancel, enter your extension as the
covering extension. Extension
numbers are optional on a button
(must be entered manually if not
stored).
Call Forwarding/Call Follow-Me
Forwards calls to another extension.
To cancel, enter your extension as
the destination. Unless Do Not
Disturb is on, phone beeps when a
call is forwarded. Extension numbers
are optional on a button (must be
entered manually if not stored).
Call Pickup
Picks up a call ringing at a specific
extension. On a programmed button,
include extension number.
Caller ID Inspect (PARTNER II only)
Shows Caller ID information for
another line (without disconnecting a
current call or putting it on hold). If
a coverage call is ringing, shows the
number of the covered extension.
To use, program [
button with lights (green light flutters
when feature is on) .
* On a button with lights, light is on when feature is on.
** Pool buttons apply only to PARTNER II systems in Hybrid mode.
Feature must be programmed onto a button with lights (see pages 2 and 5).
Button with lights recommended (not required).

Dial-Code Features

] [ ] [ ]on a
Feature 1 7
To Use
Manually
Dial [ ] [ ] [
Feature 1
the account code,
then [ ] [ ] [
Feature 1
again
Dial [ ] [ ] [
Feature 1
to turn on and off
Dial [ ] [ ] [
Feature 2 0
+ Your Extension
Number + Covering
Extension Number
Dial [ ] [ ] [
Feature 1
+ Your Extension
Number +
Destination
Extension Number
Dial [ ] [ ]
Intercom 6
+ Extension Number
Not available
7
To Use
Button
],
Press the
2
button*, dial the
]
account code, then
2
press the button
again
]
Press the
9
button* to turn on
and off
]
Press the
button* + Your
Extension Number
(if not stored)
+ Covering
Extension Number
(if not stored)
]
Press the
1
button* + Your
Extension Number
(if not stored) +
Destination
Extension Number
(if not stored)
Press the button
Press the button,
then press a line,
pool**, or intercom
button. Press the
button again to turn
off