Reverb; Adjusting Reverb Depth - Yamaha Clavinova CLP-820 Owner's Manual

Reverb

The [REVERB] button selects a number of digital reverb effects that you can
use for extra depth and expressive power.
ROOM
HALL 1
HALL 2
STAGE
REVERB
ROOM
HALL 1
HALL 2
STAGE
SONG
SELECT
REVERB
– +
/ NO
18
CLP-880/860/840/820/820S
To select a reverb type press the [REVERB] button a few times
until the indicator corresponding to the desired type lights (the indica-
tors light in sequence each time the [REVERB] button is pressed). No
reverb is produced when all indicators are off.
NOTE

Adjusting Reverb Depth

Adjust the reverb depth for the selected voice by using the [–/NO]
and [+/YES] buttons while holding the [REVERB] button. The depth
range is from 0 through 20 (the current depth setting appears on the
LED display while the [REVERB] button is held). A setting of "0"
/ YES
produces no effect, while a setting of "20" produces maximum reverb
depth. Press the [–/NO] and [+/YES] buttons simultaneously while
holding the [REVERB] button to recall the default setting for the
current voice (default depth settings are different for each voice).
OFF
No reverb effect is selected when no REVERB indicator is lit.
ROOM
This setting add a continuous reverb effect to the sound that is similar
to the type of acoustic reverberation you would hear in a room.
HALL 1
For a "bigger" reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
HALL 2
For a really spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
STAGE
A simulation of the type of reverb produced in a stage environment.
• The default reverb type (including OFF) and depth settings are different
for each voice.
.........................................................................