Loading An Existing Song - Yamaha AW 16G Owner's Manual

Overdubbing
Here's how to load an existing song from the hard disk.
1
In the Work Navigate section, repeatedly
press the [SONG] key or hold down the
[SONG] key and use the CURSOR [ ]/[ ]
keys to access the LIST page.
2
Turn the [DATA/JOG] dial to select a song.
3
Move the cursor to the LOAD button in the
screen, and press the [ENTER] key.
A popup window will ask you whether you want to
save the current song.
4
Move the cursor to either YES (if you want to
save the current song) or NO (if you do not
want to save the current song), and press the
[ENTER] key.
The song you selected will be loaded.
Note Note
If you select NO, all changes you made after last saving
the current song will be lost.
64

Loading an existing song