Grouping Input Channel Compressors; Delaying Input Channels; Muting Input Channels (On/Off) - Yamaha 02R96 Owner's Manual

Grouping Input Channel Compressors

Input Channel Compressors can be grouped, allowing you to control the compression of
several Input Channels simultaneously by operating any Compressor control in the group.
There are four Input Channel Compressor groups: i, j, k, and l.
Use the DISPLAY ACCESS [GROUP] button to locate the Input Comp Link
1
page.
Use the LAYER buttons to select the Layers.
2
The corresponding group row is selected as each Layer is selected.
Use the Up/Down cursor buttons to select Comp groups i–l.
3
The selected group is highlighted by a flashing cursor box.
Use the [SEL] buttons to add and remove Input Channels to and from the
4
selected group.
The Compressor settings of the first Input Channel added to the group are applied to all
subsequently added Input Channels.
When an Input Channel is added to a group, its [SEL] button indicator lights up.
If an Input Channel Compressor's Stereo Link option is on, it's turned off when that Input
Channel is added to a Comp group.

Delaying Input Channels

Each Input Channel features a Delay function. See "Delaying Channel Signals" on page 101
for more information.

Muting Input Channels (ON/OFF)

Input Channels can be muted as follows.
Use the LAYER buttons to select the Layers.
1
Use the [ON] buttons to mute the Input Channels.
2
The [ON] button indicators of channels that are on are lit.
ON
Grouping Input Channel Compressors
63
02R96—Owner's Manual