Parameter Recording - Yamaha 02R96 Owner's Manual

Parameter Recording

The following table summarizes parameter recording operation for each parameter. Param-
eter adjustments made on the respective display pages are also recorded.
Parameter
Input
Channel Levels
(faders)
Bus Out, Aux Send
Stereo Out
Input
Channel Mutes
Bus Out, Aux Send
(ON/OFF)
Stereo Out
Pan
Input
Surround Pan
Input
Input, Bus Out, Aux
EQ (F, Q, G, On/Off)
Send, Stereo Out
Aux send 1–8 levels
Input
Aux send 1–8 mutes
Input
Scene recalls
—
EQ, Gate, Comp,
Library recalls
Effects, Channel
Effect parameters
Effects processors
(certain parameters)
1–4
User Defined Plug-Ins
Plug-Ins 1–4
(parameters 1–4)
Faders
User Defined Remote
[ON] buttons
Layers
Encoders
OVER
Channel
WRITE
Set Layer to input, Fader mode to
Fader, use faders
FADER Set Layer to Master, Fader mode to
Fader, use faders
Use Stereo Out fader
Set Layer to input, use [ON] buttons
ON Set Layer to Master, use [ON] buttons
Use Stereo Out [ON] button
Set Layer to input, Encoder mode to
Pan, use Encoders (Also use SELECTED
PAN
CHANNEL section PAN control, or
Joystick if [LINK] is on)
Use Joystick (If [LINK] is on, also use
SELECTED CHANNEL section PAN
SURR control) (If a surround parameter is
assigned to the Encoders, also use
Encoders)
Use SELECTED CHANNEL EQUALIZER
EQ section (If EQ parameter assigned to
an Encoder, also use Encoders)
If Fader mode is Aux, use faders. If
AUX Encoder mode is Aux, use Encoders
(also use Aux Send or Aux view pages)
AUX
Use Aux Send or Aux view pages
ON
Use SCENE MEMORY section or Scene
—
Memory page
— Use corresponding library page
Use Parameter controls 1–4 (push to
—
punch in/out)
Use Parameter controls 1–4 (push to
—
punch in/out)
Select User Defined Remote Layer, use
FADER
faders
Select User Defined Remote Layer, use
ON
[ON] buttons
Select User Defined Remote Layer, use
PAN
Encoder
Parameter Recording
Operation
Faders of paired channels and
grouped faders are recorded
together
[ON] buttons of paired chan-
nels and grouped mutes are
recorded together
If Pan mode is Gang or
Inverse-Gang, paired channels
are recorded together.
If ST LINK button on Surround
Edit page is on, adjacent chan-
nels are recorded together.
EQ of paired channels, and
grouped EQs recorded
together
Aux send levels of paired chan-
nels recorded together. (If the
selected Aux Send is paired,
the send level to both Aux
Sends is recorded.)
Aux send mutes of paired
channels recorded together (If
the selected Aux Send is
paired, mutes for both Aux
Sends recorded.)
—
—
—
—
—
—
—
155
Pair/Group
02R96—Owner's Manual