15-4.Installing The Unit - Mitsubishi Electric City Multi PWFY-P100VM-E-BU Data Book

15. INSTALLATION
15-4. Installing the unit
15-4-1. Lifting method
Be very careful when carrying the product.
- Do not have only one person to carry product if it is more than 20 kg.
- Do not tilt the unit while transporting.
- PP bands are used to pack some products. Do not use them as a mean for transportation because they are dangerous.
- Tear plastic packaging bag and scrap it so that children cannot play with it. Otherwise plastic packaging bag may
suffocate children to death.
Product net weight
Model
Net weight
Model
Net weight
15-4-2. Installation method
Using the anchoring holes shown below, firmly bolt the unit to the base.
▪ PWFY unit
525
500
450
(B)
(A) 4-ø14 (Anchoring hole)
(B) (Top view)
Bases
 Be sure to install unit in a place strong enough to withstand its weight. If the base is unstable, reinforce with a concrete
base.
 The unit must be anchored on a level surface. Use a level to check after installation.
 If the unit is installed near a room where noise is a problem, using an anti-vibration stand on the base of the unit is
recommended.
MEES19K013
PWFY-P100VM-E-BU
59 kg
PWFY-EP100VM-E1-AU
33 kg
(A)
Unit: mm
PWFY-EP100VM-E2-AU
36 kg
▪ Solenoid valve kit
320
200
(B)
(A) 4-ø14 (Anchoring hole)
(B) (Top view)
AIR TO WATER
(A)
Unit: mm
53