Setting/Preselecting The Rotation Speed/Tightening Torque; Changing The Direction Of Rotation; Fitting A Socket; Maintenance And Cleaning - Parkside PASSP 20-Li A1 Translation Of The Original Instructions

Setting/preselecting the rotation
speed/tightening torque
♦ Press the torque selector
quired torque in stages. The selected torque is
shown on the torque display
♦ Press the ON/OFF switch
speed and a low tightening torque. Increasing
the pressure increases the speed and the tight-
ening torque.
■ The tightening torque depends on the selected
speed / torque selection and impact duration.
NOTE
► When tightening wheel nuts, however, the
smallest torque setting must be selected to
avoid over-tightening.
► The integrated motor brake ensures that the
tool stops quickly.
ATTENTION!
♦ The tightening torque actually attained must
always be checked with a torque wrench!

Changing the direction of rotation

♦ Change the direction of rotation by pressing
the rotation direction switch
or right.

Fitting a socket

♦ Push one of the supplied sockets
tool holder .

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always switch the appliance off and
remove the battery before carrying
out any work on the appliance.
The tool is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the tool.
■ Use a dry cloth to clean the housing. Never use
petrol, solvents or cleansers which can damage
plastic.
22
GB │ IE
│
■
to select the re-
.
lightly for a low
towards the left
onto the
■ If a lithium-ion battery is going to be stored for
an extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Unlisted replacement parts (such as carbon
brushes, switch) can be ordered via our
service hotline.
Kompernass Handels GmbH
warranty
Dear customer,
This appliance comes with a 5-year warranty
valid from the date of purchase. In the event that
this product has any defects, you, the buyer, have
certain statutory rights. Your statutory rights are
not limited in any way by the warranty described
below.
Warranty conditions
The warranty period starts on the date of purchase.
Please keep your receipt in a safe place. This will
be required as proof of purchase.
If any material or manufacturing fault occurs within
5 years of the product's date of purchase, we will
either repair or replace the product for you or re-
fund the purchase price (at our discretion). This
warranty service requires that you present the de-
fective appliance and the proof of purchase (re-
ceipt) within the 5-year warranty period, together
with a brief written description of the fault and of
when it occurred.
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us. The
repair or replacement of a product does not signify
the beginning of a new warranty period.
The X 20 V Team Series battery pack comes with a
3-year warranty valid from the date of purchase.
PASSP 20-Li A1