Table of Contents
Advertisement
PLG100-DX System Parameters
The parameters that apply to the entire system of the PLG100-DX are added to the utilities of the
main XG tone generator.
1.
Press the [UTIL] button.
The menu screen for the Utility Mode will be displayed.
2.
Pressing the [SELECT
[ENTER] button. The plug-in board select screen will be displayed.
3.
Press the [SELECT
edited, then press the [ENTER] button (select PLG100-DX here).
The parameter screen for the selected plug-in board will be displayed.
4.
Pressing the [SELECT
be set. Change the value for the parameter using the [VALUE
5.
Press the [EXIT] button several times to return to the initial screen.
26
] button and move the cursor to "PLUGIN," then press the
/
] buttons and move the cursor to the plug-in board to be
/
] buttons, move the cursor to the parameter which is to
/
] buttons.
Advertisement
Table of Contents
