Selecting/Editing The Dx System Parameters (Modular Synthesis Plug-In System) - Yamaha PLG150-DX Owner's Manual

Selecting/Editing the DX System Parameters
(Modular Synthesis Plug-in System)
The example displays used in the following explanations are all taken from the CS6x.
1
Press the UTILITY button.
The Utility Mode display appears.
2
Turn the PAGE knob clockwise until "PLG150-DX" is shown at the bottom
left of the display.
Keep turning the knob to select the different DX System parameters, indicated just above knob C
and knob 2.
3
Use knobs C and 2 to select the desired DX System parameter and change
the value.
Once one of the parameters is selected (the arrow cursor appears next to the value), you can also
adjust the value with the DATA knob or the DEC/INC buttons.
24
MSTR TG) Vol
Sys 127
PLG1 System) BulkBlock
PLG150-DX
NoteShift Tune
+ 0 + 0.0c
VelCurve
01-32 Normal