Gsb 15 Removal; Gsb 15 Re-Installation - Garmin GI 275 Maintenance Manual

5.6.1

GSB 15 Removal

To remove the GSB 15, perform the following procedure:
1. Disconnect the GSB 15 connector.
2. If installed with a mounting kit, remove the four screws securing the mounting plate to the
instrument panel (refer to Figure 5-9 or Figure 5-10).
3. Remove the two screws securing the GSB 15 to the instrument panel/mounting plate/mounting
surface.
5.6.2

GSB 15 Re-installation

To re-install the GSB 15, perform the removal procedure in reverse. Torque all screws in accordance with
Figure 5-8, Figure 5-9, or Figure 5-10.
190-02246-11
Rev. 1
GI 275 Part 23 AML STC Maintenance Manual
Page 5-17