Gi 275 Re-Installation - Garmin GI 275 Maintenance Manual
Attitude indicator
Hide thumbs
Also See for GI 275:
- Installation manual (531 pages) ,
- Pilot's manual (332 pages) ,
- Maintenance manual (102 pages)
Table of Contents
Advertisement
5.1.3
GI 275 Re-installation
To re-install the GI 275, perform the following procedure:
1. Place the GI 275 into the instrument panel cutout.
2. Install the three screws. Torque to specifications in Figure 5-1.
3. Connect the pitot-static connections.
4. Connect the wiring connector(s) and any installed antenna wires to the back of the GI 275 and
tighten the retaining screws.
5. Perform the Configuration mode ground checks in Section 5.14.1.
190-02246-11
Rev. 1
GI 275 Part 23 AML STC Maintenance Manual
Page 5-5
Advertisement
Chapters
Table of Contents
Troubleshooting
