Rear Panel - Yamaha PortaTone PSR-202 Owner's Manual

!5 [START/STOP] button
When the Style mode is selected, this alternately starts
and stops the auto accompaniment. (See page 43.)
When the Song mode is selected, this alternately starts
and stops song playback. (See page 32.)
!6 [INTRO/ENDING/rit.] ([
When the Style mode is selected, this is used to con-
trol the Intro and Ending functions. (See page 45.)
When the Song mode is selected, this is used to
rewind during song playback. When song playback is
stopped, it is used to reverse to specific measure num-
bers in the song. (See page 32.)
!7 [MAIN/AUTO FILL] ([
When the Style mode is selected, this is used to
change auto accompaniment sections and control the
Auto Fill function. (See page 46.) When the Song
mode is selected, this is used to fast forward during
song playback. When song playback is stopped, it is
used to advance to specific measure numbers in the
song. (See page 32.)
I Rear Panel
@1
@1 MIDI IN, OUT terminals
These are for connection to other MIDI instruments
and devices. (See pages 9, 52.)
@2 SUSTAIN jack
This is for connection to an optional FC4 or FC5
Footswitch. (See page 9.)
REW]) button
FF]) button
@2
Panel Controls and Terminals
!8 [TEMPO/TAP] button
This button allows you to tap out the tempo and auto-
matically start a selected song or style at that tapped
speed. (See page 44.) It also is used to call up the
Tempo setting, letting you set the Tempo with the
numeric keypad or [+]/[-] buttons. (See page 31.)
!9 [DEMO] button
This is used to play the Demo songs. (See page 18.)
@0 [MULTI PAD] buttons
These are used to automatically play pre-programmed
musical phrases. (See page 51.)
@3
@3 PHONES/OUTPUT jack
This is for connection to a set of stereo headphones or
to an external amplifier/speaker system. (See page 9.)
@4 DC IN 12V jack
This is for connection to a PA-3C or PA-3B AC power
adaptor. (See page 8.)
@4
7