Download Print this page
Yamaha PSR1000 Quick Steps
Hide thumbs Also See for PSR1000:

Advertisement

Fgfgd
PSR1000/2000
¤¤¤¤¤¤¤¤¤¤¤¤
TOP FEATURES
Microphone input with Vocal Harmony (PSR2000)
Lyric display for song disks with lyrics
Custom lyric input for User Songs
Notation display (PSR2000)
Large Full Dot backlit LCD screen
"Music Finder" with 500 song selections
"Organ Flutes" with 8 virtual drawbars (PSR2000)
High quality Voices including stereo samples
3 Intros/Endings + 4 Variations/Fills per style
"To Host" port for direct hookup to computer
Pitch Bend and Modulation Wheels
Groove/Dynamics function for Auto Accompaniment
Interactive Help in 5 languages
SYSTEM DATA RESET
(This will erase any custom settings.)
1) Power on while holding down key furthest to right (C).
PLAYING THE DEMOS
1) Press [DEMO] to play songs randomly.
2) Use [BACK] and [NEXT] to select a Demo category.
3) Use '1' [^] and '2' [^] to select different pages.
4) Use [A] – [J] to select an item on a page to demo.
5) Press [START/STOP] in SONG section to stop Demo.
6) From the FUNCTION page, press '8' [v] 'AUTO' to
play all Demo items automatically.
7) Press [EXIT] to exit Demo Mode.
PLAYING THE VOICES
1) Press a category button in the VOICE section.
(Ex. [PIANO & HARPSI.])
2) Use [A] – [J] to select a Voice. (Ex. 'GrandPiano')
3) To layer two Voices, press [EXIT], turn ON [LAYER]
button, press [G] 'LAYER', and repeat steps 1 - 2.
4) Play the keys to hear the Voice(s).
5) When finished, turn OFF [LAYER] button.
VIRTUAL ORGAN DRAWBARS (PSR2000)
1) Press [ORGAN FLUTES] in the VOICE section.
2) Press [SOUND CREATOR].
3) Use [BACK] and [NEXT] to select 'FOOTAGE' page.
4) Use buttons [1] – [8] under display to adjust drawbars.
PLAYING THE STYLES
1) Press a button in STYLE section. (Ex.[POP & ROCK])
2) Use [A] – [J] to select a Style. (Ex. '60'sRock 1')
3) Turn on the [ACMP] button (red LED illuminates).
4) Press [INTRO], then [SYNC START].
5) Play a chord in the left section of the keyboard.
6) Press [ENDING] to finish hearing the Style.
© 2002 Yamaha Corporation of America, 6600 Orangethorpe Ave., Buena Park CA 90620
© 2002 Yamaha Corporation of America, 6600 Orangethorpe Ave., Buena Park CA 90620
02
¤¤¤¤¤¤¤¤¤¤¤¤
(New)
(New)
(New)
(New)
(New)
(New)
|
|
|
RTUAL
|
USING "ONE TOUCH" SETTINGS
1) Select a Style (see above).
2) The 4 [ONE TOUCH SETTING] buttons will now call
up 4 appropriate Voices for the selected Style.
MUSIC FINDER
1) Press [MUSIC FINDER].
2) Use '2' [^] and [v] to select a Song.
3) A Style and Voice is automatically set up for the Song.
NOTE: Custom song titles & setups can also be stored.
VOCAL HARMONY (PSR2000)
1) Plug a 250 ohm dynamic mic into MIC./LINE IN jack.
2) Adjust (INPUT VOLUME) knob on back of unit, while
singing into mic.
3) In 'MIC.' section of front panel, make sure [VOCAL
HARMONY] is ON, and [TALK] is OFF.
4) Press [VH TYPE SELECT] to select Vocal Harmony
types.
5) Start a Style playing with a chord (see above).
6) While holding the chord, sing into the mic.
7) Adjust Style Volume by first pressing [BALANCE],
then using '2' [^] and [v] to control the Volume.
PLAYING SONGS WITH LYRICS FROM DISK
1) Insert a Standard MIDI File (SMF) disk with Lyric data.
2) Press [A] 'SONG' button in MAIN screen.
3) Use [A] – [J] to select a Song.
4) Press [B] 'Lyrics' button.
5) In 'SONG' section of front panel, press
[START/STOP] to start the Song; the Lyrics will
appear in the display in time with the music.
6) Press [START/STOP] to stop the Song.
PART MUTING & VOLUME CONTROL
1) Play a Style or Song (see above).
2) To mute / un-mute Parts with buttons [1] – [8], press
[CHANNEL ON/OFF] to display 'STYLE' or 'SONG'.
3) To adjust Part volumes with buttons [1] – [8], press
[MIXING CONSOLE] to display 'STYLE' or 'SONG' for
'VOL/VOICE' page.
SONG RECORDING (Quick Method)
In the 'SONG' section of the front panel:
1) Press and hold [REC], then press [TOP].
2) Release the buttons, then select a Style and Voice.
3) Press and hold [REC], then press the Track buttons
above it for the Tracks that are to be recorded.
EXAMPLE: [STYLE], [L], or [R].
4) Release the buttons, then play the keyboard to start
recording.
5) Press [REC] to stop recording.
6) To play the Song, press [TOP], then [START/STOP].
7) To stop the Song, press [START/STOP] again.
|
|
|
|
|
|
QS PSR1000/2000 / 2-02
QS PSR1000/2000 / 2-

Advertisement

loading

Summary of Contents for Yamaha PSR1000

  • Page 1 7) To stop the Song, press [START/STOP] again. 6) Press [ENDING] to finish hearing the Style. © 2002 Yamaha Corporation of America, 6600 Orangethorpe Ave., Buena Park CA 90620 © 2002 Yamaha Corporation of America, 6600 Orangethorpe Ave., Buena Park CA 90620...
  • Page 2 VIII. Making Global Settings for Voices IX. Making Songs Play Continuously X. Recording and Saving a Song XI. Recording to PSR1000/2000 Sequencer from External MIDI Source XII. Saving and Loading Registrations XIII. Saving User Voice Edits to Registration Memory XIV. Some Settings are not Storing with the Registrations XV.
  • Page 3 I. Copying Files from one Floppy Disk to Another Floppy Disk IMPORTANT: Commercially available music data is subject to protection by copyright laws. Copying commercially available data is strictly prohibited, except for personal use. Some music software is purposely copy-protected and cannot be copied.
  • Page 4 To duplicate entire disks, the ‘DISK TO DISK COPY’ feature may be used: 1) Insert the 'source' floppy disk containing the files to be copied. 2) Press the [FUNCTION] button. 3) Press the [I] ‘UTILITY’ button. 4) Use the [BACK] and [NEXT] buttons to select the ‘DISK’ page in the screen. 5) Press the [F] ‘DISK TO DISK COPY’...
  • Page 5: Creating A User Style

    The following procedure describes how to create a User Style from scratch. This is useful when the PSR1000/2000 does not have a built-in Style which fits the style of music that the user wants to play. Creating a User Style from scratch is also useful to create custom drum accompaniments.
  • Page 6 or [F] - [I] buttons twice; the chosen Part may then be selected from any of the existing Styles, using the [A] - [J] buttons. EXAMPLE: The RHYTHM2 Part from the Style, '60'sGtrPop' may be used for the RHYTHM2 Part in the New Style. 3) Press the [EXIT] button to return to the 'ASSEMBLY' page.
  • Page 7 Saving the User Style: 1) Press the [I] 'SAVE' button to select a destination for storing the User Style. 2) Use the [BACK] and [NEXT] buttons to display the 'USER' or 'FLOPPY DISK' page. 3) Press the '6' [v] toggle button to name the User Style. 4) Use the toggle buttons to select the characters for the User Style name.
  • Page 8 Another way that data may be lost, is if the storing procedure for System Setup data is performed incorrectly; on the PSR1000/2000, if a user changes the settings in a screen, they must remember to press the [EXIT] button afterward, before turning OFF the power, or the data is lost.
  • Page 9 'MIXING CONSOLE' function from the 'SET UP' view in 'SONG CREATOR'. Changing the Voice (for Example) on a Track: 1) Load the Song into the PSR1000/2000. 2) Press the [DIGITAL RECORDING] button. 3) Press the [A] 'SONG CREATOR' button.
  • Page 10 V. Enabling an External MIDI Device to Control Keyboard Sections The PSR1000/2000 can be configured so that the 'MAIN', 'LAYER' and 'LEFT' Voice sections can be individually controlled by an external MIDI device. It can also be configured so that an external MIDI device can control it the same way it's own keyboard does (controlling whatever sections are active on the front panel).
  • Page 11 b) Use the [A] '^', [B] 'v', and [1] - [8] toggle buttons to select 'ON' for the desired MIDI Channel (the Channel being transmitted by the external MIDI device) in the screen. 11) Press the [EXIT] button once. 12) Press the [NEXT] button to select the 'USER' page in the 'MIDI' screen. 13) Use the [A] - [J] buttons to select a destination to save the edited MIDI Setup 14) Press the ‘6’...
  • Page 12: Factory Reset Procedure

    VI. Factory Reset Procedure The standard Yamaha factory reset procedure for many PSR Series keyboards will initialize the PSR1000/2000 System Setup Data, but not other data such as the MIDI Setup, Music Finder, and User Files/Folders; to do this, further steps are required (see below).
  • Page 13 VII. Loading Music Finder Files into a PSR1000/2000 Custom MUSIC FINDER files can be loaded into a PSR1000/2000, to replace the file containing the original factory selections. 1) If the file is on a floppy disk, insert the floppy disk.
  • Page 14 VIII. Making Global Settings for Voices If Voice settings such as Effects, EQ and Harmony are changed for a Voice, these settings normally will reset to something else when a different Voice is chosen. However settings can be made to affect all Voices globally, by editing the 'VOICE SET' page.
  • Page 15 IX. Making Songs Play Continuously In the 'SONG SETTING' screen, the 'Song Chain Play' function can be turned ON, to automatically play Songs consecutively and continuously. 1) Press and hold the [DIRECT ACCESS] button, then press the [REPEAT] button. 2) Press the [I] button to select SONG CHAIN PLAY 'ON' in the screen. Owner's Manual, p.
  • Page 16 X. Recording and Saving a Song The PSR1000/2000 can record Songs with up to 16 separate Channels (tracks), each Channel using a different Voice. There are two different methods for recording; 'Quick Recording' for recording a Song in one or two takes, and 'Multi Recording' for recording multiple Channels by as little as one Channel at a time.
  • Page 17 b) Use the [C] ‘^’ and [D] ‘v’ buttons to select a Part. 5) To record multiple Channels/Parts simultaneously, repeat steps 2 – 4. 6) To start recording, begin playing the keyboard, or press the silver [START/STOP] button in the ‘SONG’ section of the front panel. NOTE: When recording Auto Accompaniment Parts from a Style, it is a good idea to turn ON the [INTRO] button and [SYNC.
  • Page 18 XI. Recording to PSR1000/2000 Sequencer from External MIDI Source The on-board sequencer of the PSR1000/2000 can be used to record MIDI data from external sources, such as MIDI bass pedals, keyboards and hardware or computer-based sequencers. This is done by assigning the desired MIDI Receive Channels to 'Keyboard' mode.
  • Page 19 XII. Saving and Loading Registrations Registration settings are saved in Banks of 8 to either the internal 'USER' memory, or the 'FLOPPY DISK' drive. For further organization, ‘Folders’ can be created and named, then multiple Registration Bank ‘Files’ can be organized within each Folder.
  • Page 20 Bank ‘File’ containing the current 8 Registrations that are stored to the 8 ‘REGISTRATION MEMORY’ buttons. 9) Use the [1] - [8] toggle buttons under the screen to name the Registration Bank ‘File’. 10) Press the [8 ^] 'OK' button to save the Registration Bank ‘File’ into the chosen memory location.
  • Page 21 the desired Registration Bank ‘File’. 4) Press the [G] 'YES' button to confirm the choice. 5) The 8 'REGISTRATION MEMORY' buttons will now call up the Registrations in the selected Bank. Owner's Manual, p. 84-86...
  • Page 22 XIII. Saving User Voice Edits to Registration Memory Unlike previous PSR models, the PSR1000/2000 actually stores the edited parameter data used to create a User Voice, if that User Voice is stored to one of the 'REGISTRATION MEMORY' buttons. This is a very useful feature, because if...
  • Page 23 4) Repeat steps 2 - 3 for other desired setting Groups. 5) If something is still not storing with a Registration, check the Parameter Chart on p. 25-30 in the PSR1000/2000 Data List booklet to make sure that it is a setting which can be saved with a Registration.
  • Page 24 XV. Storing Intro and Ending Settings Each Preset Style on the PSR1000/2000 has a specific Intro and Ending length and type. The choices available for the Intro are 'CountIn', '4bar1', or '4bar2'. The choices available for the Ending are 'Fill&Hit', '2bar', or '4bar'. These variations of Intro and Ending may be changed temporarily from the front panel, or stored permanently to User memory or Floppy Disk as a 'User Style'.
  • Page 25 XVI. Transposing a Song The 'TRANSPOSE' [-] and [+] buttons on the front panel of the PSR1000/2000 are for transposing the pitch that the keyboard plays. To "temporarily" transpose the key of a Song, use the 'TUNE' section of the 'MIXING CONSOLE' screen.
  • Page 26 8) When finished, press the [I] 'SAVE' button. 9) Use the [BACK] and [NEXT] buttons to select a permanent memory area ('USER' memory or 'FLOPPY DISK') to store the transposed Song into. 10) Use the [A] - [J] buttons to select a location in the chosen memory area. 11) Press the ‘6’...
  • Page 27 XVII. Using Lead/Harmony Balance in 'Vocal Harmony Control' on a PSR2000 The Vocal Harmony processor uses two parts for Vocal Harmony effects on the PSR2000. One part is used to produce the Harmony 1 and Harmony 2 sounds; the other part is used for the original 'Lead' sound, as well as the 'Gender change' sound.
  • Page 28 Saving the Edited Effect: 1) Press the [I] 'SAVE' button. 2) Rename the effect, if desired. 3) Press the '8' [^] 'OK' button. Balance Setting: 1) Press the [MIC. SETTING] button. 2) Press the [J] button to select 'VOCAL HARMONY CONTROL'. 3) Use the '4' [v] toggle button to select 'L<H63' for the Balance ('Bal.') section.

This manual is also suitable for:

Psr2000