Adjusting The Metronome Volume - Yamaha PortaTone PSR-202 Owner's Manual

3
Turn on the Metronome.
Press the [METRONOME] button.
To turn the Metronome off, press the [METRONOME] button again.
Setting the Metronome Time Signature
The time signature of the Metronome can be set to var-
ious quarter-note based meters.
• The time signature changes automatically when a style or song is
selected.
Hold down the [METRONOME] button (until "TIME
SIG" appears in the display), then press the button on
the numeric keypad that corresponds to the desired
time signature (see chart at right).

Adjusting the Metronome Volume

You can adjust the volume of the Metronome sound independently of the other PSR-202 sounds. The volume range
is 000 - 127.
1
Select the Metronome Volume function in the Overall menu.
Press the [OVERALL] button, repeatedly if necessary, until "MTR VOL" appears
in the display.
Indicates Metronome
Volume is selected
2
Change the value.
Use the numeric keypad to set the desired Metronome Volume value, or use the
[+]/[-] buttons to increase or decrease the value.
1
Number. Time signature
button
1 1/4 — Plays only "1" beats (all high clicks)
2 2/4
3 3/4
4 4/4
5 5/4
6 6/4
7 7/4
8 8/4
9 9/4
0 Plays no "1" beats (all low clicks)
4
Current Metronome value
100
TEMPO
116
Portable Grand
Indicates the beat number in
the tempo/measure.
Resetting the Metronome
Volume Value
To restore the default Metro-
nome Volume value of "100,"
press both [+]/[-] buttons
simultaneously (when Metro-
nome Volume is selected).
21