Term Ip Login/Logout Operation - NEC NEAX2000 IPS System Manual

CÔNG TY VIỄN THÔNG VIỆT PRO
term
D IP LOGIN/LOGOUT OPERATION
term
To connect the D IP to the network, registration of the ID for each D
To provide security, passwords for D
the password.
Follow the registration procedure as shown below.
term
D IP Login
NOTE: The way of ID registration is determined by CM08>513 and CM15 Y=480.
Before registering the ID, program the system data. See
Assignment".
(1) Automatic Login Mode (Authentication by MAC Address)
NOTE 1: Do the following procedure under On-Line mode of the MP card.
NOTE 2: To save the data registered by the following operation to your PC, select "Other" from the pull-
down menu of the area name and input "80" in Area number on the Save/Load/Verify dialog of
the MATWorX program.
The data cannot be saved by the basic area name "All office data for MP (Basic + Option)" on
the Save/Load/Verify dialog.
NOTE 3:
To load the registered data from your PC, reset the MP card after loading operation of the
MATWorX.
It takes 5 minutes to start up the D
When you start up the D
term
D
L o g i n
P a s s w d
C a n c e
STEP1: Enter the station number of the D
STEP2: Press Set key (soft key).
Chuyên phân phối tổng đài NEC
term
IP can be registered to the system that administers and identifies
Page 129
term
term
IP, the following appears on the LCD.
IP Display (ID Registration without Password)
:
:
l B K
term
IP to the first row behind "Login :".
CHAPTER 3 SYSTEM DATA PROGRAMMING
term
"D
IP after MP card is reset.
S e t
– 142 –
http://vietpro.com.vn
term
D IP LOGIN/LOGOUT OPERATION
term
IP is required.
IP Login/Logout Data
O K
ND-71503(E) Rev.5.0
FEBRUARY/28/2002
9pch3001.fm