Yamaha PLG100-XG Owner's Manual page 10

Overview of the PLG100-XG
When Editing XG Voices Using the XG Editor in XGworks
Start the XG Editor (select "XG Editor" in the Window menu). From the XG Editor, select "XG
Editor Setup" in the Setup menu and set "Part 1 - 16" to the appropriate MIDI OUT Port for use
with the PLG100-XG. This will differ depending on your particular instrument.
• For Modular Synthesis Plug-in System instruments (such as the CS6x, CS6R, S80, etc.),
select the Port corresponding to "Yamaha CBX A Driver."
• For 64-Part XG tone generators (such as the MU100 or MU128 ), select the Port correspond-
ing to "Yamaha CBX E Driver."
• For 32-Part XG tone generators (such as the MU100R or SW1000XG), select the Port corre-
sponding to "Yamaha CBX C Driver."
10