Connecting Peripheral Equipment - Sharp PN-86HC1 Operation Manual

Connecting Peripheral Equipment

1 2 3
Caution
• Be sure to turn off the main power switch and disconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Be careful not to confuse the input terminal with the output
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and other problems.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
TIPS
• When using the touch panel, connect the USB cable to the
computer.
• Images may not be displayed properly depending on the
computer (video card) to be connected.
• Use the automatic screen adjustment when a computer
screen is displayed for the first time using VGA(D-SUB) or
when the setting of the computer is changed. The screen
is adjusted automatically using Auto Adjust in PC Setting of
the Picture menu.
• If the audio output from the playback device is connected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor's audio input, and
connecting the monitor's audio output to the speakers or
other devices.
12
E
7 8 9 10 11
1. USB ports (USB 2.0 compliant) (5 V, 500 mA)
• Connect a USB flash drive to the USB port.
• Do not connect a USB device other than a USB flash
drive.
• Before removing a USB flash drive, follow the steps for
removal. (See page 13.)
Supported USB flash drives
File System
Capacity
• D o not use a USB flash drive with a security function or
a write protection function.
• U se a USB flash drive with a shape that can be inserted
in the USB port. Some USB flash drives with special
shapes cannot be inserted. Do not forcibly insert a USB
flash drive. This may damage the connector and cause
failure.
Caution
• Please do not change the video input while a USB flash
drive is inserted in the front facing USB port. This may
damage saved data on the USB flash drive. Please remove
the USB flash drive following the steps on page 13 before
changing the video input. Please insert a USB flash drive in
the rear USB port when you save data.
2. HDMI 1 input terminal
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K.
• This terminal does not support HDMI CEC.
3. TOUCH PANEL terminal 1 (for touch panel)
• To use the touch panel with a computer, connect the
touch panel to the computer with a USB cable.
• To use this terminal, connect your computer to the HDMI
1 input terminal on the front of the monitor.
4. HDMI 3 input terminal
5. HDMI 2 input terminal
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K.
4
5
6
1
12 13 14
FAT32
Up to 32 GB
(maximum file size 4 GB)