Sharp PN-86HC1 Operation Manual page 33

nSound
Sound Mode
Sound settings can be changed to match the scene.
Standard/Music/Movie/Sports/User
Bass
Adjusts the volume of bass-level sound.
You can set this when the Sound Mode is User.
Treble
Adjusts the volume of treble-level sound.
You can set this when the Sound Mode is User.
Balance
Adjusts the balance of the audio sound between right and left.
SPDIF
Set to On to output PCM format on the digital audio output (optical) terminal.
nSetting
HDMI RGB Input Range (HDMI)
Sets the RGB input signal range.
When using HDMI set to Auto, the RGB input signal range is detected automatically. Use Auto normally.
If the RGB input signal range cannot be set appropriately even when using Auto, set according to the image. When the setting
is different, images will be displayed with washed out blacks and compressed gradients.
HDMI CEC
HDMI 1 input terminal does not support HDMI CEC.
On ..................... HDMI CEC function is used.
If the device connected to the HDMI input terminal supports CEC, power of the monitor is turned on when
playback starts on the device.
Off .....................HDMI CEC function is not used.
System Standby
Set whether the connected device enters standby mode when the monitor enters standby mode. You can set this when the
HDMI CEC is On.
Device List
The name of the connected device appears. You can set this when the HDMI CEC is On.
HDMI Mode
Use Mode1 normally.
If video is not displayed correctly when one of the HDMI1 to HDMI3 input terminals is used, such as when a device that do not
support 4K is connected, set to Mode2.
Blue Screen
When set to On, a blue screen will appear when there is no input signal.
Mute With Freeze
Set whether or not audio turns off during freeze.
Backlight Off
When set to On, the backlight turns off. Audio does not turn off. When you touch the screen, the backlight turns back on.
Off If No Signal
This setting determines whether or not to set the monitor to go into standby mode if there is no signal or no operation is
performed for 15 minutes.
Operation Mode
Mode1........Off If No Operation is set to On, and Power Save Mode is set to On.
(These settings can not be changed.)
Mode2........Will perform standard operation. Off If No Operation is set to Off, and Power Save Mode is set to Off. These
settings can be changed.
Menu Items
33
E