Table of Contents
Advertisement
Connecting Peripheral Equipment
6
1
Digital audio output (optical) terminal
For connection to an audio device equipped with a digital
audio input terminal.
2
LAN terminal (RJ-45)
Connect to LAN in order to manage and control the monitor
over the network.
3
RS-232C input terminal (D-Sub 9-pin)
Connect RS-232C input from external equipment, such
as a computer, in order to control RS-232C functions.
See
page
42.
4
AUDIO output terminal
Audio signal output from USB-C and HDMI to an external
device (stereo receiver, amplifier, etc.).
NOTE:
This connector is not a headphone terminal.
5
REMOTE input terminal
Use an optional sensor unit by connecting it to your monitor.
NOTE:
Do not use this connector unless specified.
TIP:
• When the optional sensor unit is connected, the
monitor's remote control sensor is disabled.
• For the remote control, please use the remote
control included with this monitor.
1
OPTICAL OUT
2
LAN
3
RS-232C
4
AUDIO OUT
5
REMOTE IN
USB1
USB2
HDMI 1 (ARC) IN
7
HDMI 2 IN
HDMI 3 IN
USB3
8
USB-C
6
USB ports
USB1 (Hub/0.5 A): Downstream port (USB Type-A).
USB2 (Hub/0.9 A): Downstream port (USB Type-A).
Connection used by external USB devices (such as
cameras, flash memory, keyboards, etc.).
USB flash drive reader for use with the internal Media
Player.
USB3 (Hub/0.9 A): Downstream port (USB Type-A) for a
device connected to the USB-C port.
A computer connected to the USB-C port can be
controlled by the external devices via this port.
This connection can also be used by external USB
devices (such as cameras, flash memory, keyboards,
etc.).
NOTE:
• Please make sure the connector shape and
orientation is correctly aligned when connecting
the USB device or cable.
• Connecting/disconnecting a USB flash drive
with the monitor already powered on is not
recommended. To prevent damage to the
monitor and possible corruption of the connected
device's data files, the monitor's main power
switch should be off before making connections
or disconnections.
TIP:
• Format a USB flash drive in the FAT32 format.
Refer to the computer's instruction user's manual
or Help file on how to format a USB flash drive.
• If the monitor does not recognize a connected
USB flash drive, make sure the file structure is
FAT32.
• The monitor is not guaranteed to work with all
USB storage devices sold commercially.
• Android system folders might be created
automatically when a USB flash drive is connected
to USB1/USB2/USB3.
English−15
HDMI
Advertisement
Table of Contents
