Connecting Peripheral Equipment - Sharp 60005523 Operation Manual

Connecting Peripheral Equipment

nRear view
nFront view
Caution
• Be sure to turn off the main power switch and disconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Be careful not to confuse the input terminal with the output
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and the other problems.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
TIPS
• Images may not be displayed properly depending on the
computer (video card) to be connected.
• If the audio output from the playback device is connected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor's audio input, and
connecting the monitor's audio output to the speakers or
other devices.
• If the computer is connected to this monitor with a USB
Type C cable, the device recognition sound of OS may
sound several times.
12
E
5
6
9
7
8
10
11
15
14 13 12 17 16
1. USB Type C 1 input terminal
2. USB Type C 2 input terminal
• Use the USB Type C cable (supplied).
• You can connect a device that supports DisplayPort
alternate mode.
In order to supply power to connected devices, it is
necessary to support the Power delivery standard.
• Connect the USB Type C extend cable (supplied) between
the USB Type C cable (supplied) and the external device.
When connecting/disconnecting to the external device,
plug/unplug the USB Type C extend cable to prevent
damage to the USB Type C cable.
3. HDMI input terminal
• Use the HDMI cable (supplied).
4. USB Type B input terminal for touch back (pair with
HDMI input terminal)
• To use the touch panel with a computer, connect the touch
panel to the computer with a USB A to B cable (supplied).
5. USB port for IoT sensor hub/USB devices
6. USB port for IoT sensor hub/USB devices
• To use the IoT sensor hub, connect the IoT sensor hub to
these ports with the Micro USB cable (supplied).
7. Line out Audio output terminal
1
2
4
3