Tool Specification; General Safety Rules - IVT TC - 900 Manual

Manual instruction

Tool specification

Voltage/Frequency [V~Hz]
Rated power [W]
No-load speed [RPM]
Protection Degree
Cutting depth [mm at 90°- 45°]
Blade size [mm]
EN Work table size [mm]
Sound pressure [dB(A)]
Sound power [dB(A)]
K
Weight [Kg]
Safety regulation for the use

General safety rules

This model of Tile cutter (TC-900) is intended to cut
flooring and wall tiles.
It can be used to cut small and medium-sized tiles
(tiles, ceramic or similar) depending on the size of
the machine.
It is particularly designed for the DIY and handicrafts.
Cutting wood or metal is not permitted. Use the
machine only for the purpose it was designed. Any
other use is not permitted.
The following listed safety instructions should serve
you for the right use and for the protection of your
own safety. Therefore please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature
supplied with your tool for any future reference.
Comply with the safety information and the
warnings on the tool.
Be familiar with the controls and the proper use of
the tool before attempting to use it and above all,
make sure you know how to stop to use it in case
of emergency.
Following these simple instructions will also
maintain your tool in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• In addition to the design of the tool there may
be safety decals that must be considered and
indications about the safety equipment to use.
model
ø
The prevention of accidents is dependent upon
the awareness, common sense and proper training
of everyone involved in the operation, transport,
maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children
should be supervised to ensure that they do not
play with the tool.
• Keep children and pets away. All onlookers
should be kept at a safe distance away from the tool
when it is in use.
• The user is responsible for third parties while
working with the tool.
• People who aren't acquainted with the
operating instructions, children, juveniles who have
not yet reached the minimum age for using this tool
and people under the influence of alcohol, drugs or
medication are not allowed to use the tool . Local
regulations may restrict the age of the operator.
WARNING: The consumption of alcohol,
medication and drugs, plus states of
illness, fever and fatigue will affect your
ability to react. Do not use this tool in any of these
situations.
• Make sure that all the protective devices (if
present) are fitted and are in good condition.
• Never operate the tool with defective safety
devices or guards (if present), or without safety
devices in place .
• Inspect the entire tool to look for loose parts
(e.g. nuts, bolts, screws, etc.) and for any damage.
Check at frequent intervals if screws and bolts
are properly tight to be sure the equipment is in
safe working condition. Repair or replace them, if
8
TC-900
230~50
900
2950
IP20
41- 20
ø
200 x 25.4 x 2.4
500 x 400
91.8
104.8
3
12.5