Setting Up The Mixer; Setup Procedure; N12 Setup Example (Home Recording) - Yamaha DIGITAL MIXING STUDIO N12 Owner's Manual

Setting Up the Mixer

Setting Up the Mixer

Setup Procedure

1.
Before connecting microphones and other
instruments to the mixer, make sure that the
power to all devices is turned off. Also, make
sure that all of the mixer's channel faders and
master control faders are set all the way down.
2.
For each channel connection, connect one end of
the cable to the relevant microphone or instrument
and securely connect the other end to the
appropriate input jack on the mixer.

n12 Setup Example (Home recording)

external effects unit
headphone
amplifier
player's monitor
computer
22
Owner's Manual
synthesizer,
rhythm machine
sound source
(CD, MD, DAT, etc.)
external recorder
monitor system
You cannot use both INPUT A and INPUT B jacks for each
NOTE
input channel. If you connect cables to both jacks, INPUT B
will be used and INPUT A will be disabled.
3.
To avoid loud pop noises and possible damage
to your speakers, turn on the power to the
devices in the following order: peripheral devices
→ n8/n12 → power amps (or powered speakers).
Turn off the power to the devices in the reverse
order: power amps (powered speakers) → n8/n12
→ peripheral devices).
microphones
guitar, bass
guitar, bass
(Hi-Z)
effects unit
(DI)
external effects unit
player's headphones
control room
headphones