Yamaha CD Recordable/Rewritable Drive CRW-F1 Owner's Manual page 33

If the drive name is not shown or there is
The CRW-F1 drive has not been recognized properly. Check the cable
connections and the master/slave settings of the IDE devices connected to the
computer.
For Windows 2000 Professional
1
Select Start on the taskbar, then Settings, Control Panel, System,
Hardware tab, and Device Manager. The Device Manager dialog box
appears.
2
If there is
"YAMAHA CRW-F1E" should be shown when the CRW-F1 drive has
been recognized properly.
For Windows 95/98/98 Second Edition/Me
1
Select Start on the taskbar, then Settings, Control Panel, System, and
Device Manager tab. The Device Manager dialog box appears.
Note
For Windows Me, if the System icon is not shown in the Control Panel
window, click view all Control Panel options on the left side of the window.
2
If there is
"YAMAHA CRW-F1E" should be shown when the CRW-F1 drive has
been recognized properly.
3
Change the DMA setting.
The DMA setting may not be displayed, depending on your computer. In such
a case, use the CRW-F1 drive without changing the DMA setting.
Tip
To maximize the performance of the CRW-F1 drive, changing the DMA setting
for other IDE devices such as a hard drive or a CD/DVD-ROM drive is
recommended.
to the left of DVD/CD-ROM Drive, click
to the left of CDROM, click
or mark.
.
.
Continued on next page
24