Yamaha CD Recordable/Rewritable Drive CRW-F1 Owner's Manual page 31

5
Connect the 4-pin internal power cable of the computer (DC
5 V and DC 12 V) to the power connector on the rear panel of
the CRW-F1 drive.
Top
Bottom
Note
The 4-pin internal power cable cannot be connected if it is upside down. If the
connector does not connect easily, check that it is in the correct direction.
6
Tighten four screws fastened tentatively with a Phillips
screwdriver.
7
Attach the computer cover and reconnect the peripheral
devices and cables.
Power connector
4-pin internal power cable
22