Tool Specification; General Safety Rules - IVT CRHM-14.4L Manual

Manual instruction
Symbols

Tool specification

EN
Charging voltage / Frequency [V/Hz]
Rated voltage [V]
Rated speed [RPM]
Impact speed [BPM]
Max diameter 0 in concrete [mm]
Max diameter 0 in steel [mm]
Max diameter 0 in wood [mm]
Sound pressure level [dB(A)]
Sound power level [dB(A)]
K [dB]
Vibration level [m/s2]
Weight [Kg]
Rechargable battery type
Capacity [A]
N° of battery cells
Charging time [hrs]
Safety regulation for the use

General safety rules

The cordless rotary hammer (CRHM-14.4L) is
intended for work in concrete, bricks and stones. It
is also suitable for drilling without impact in wood,
metal, ceramics and plastics. The electronic control
and right/left rotation make this tool also suitable
for screwing.
The following listed safety instructions should serve
you for the right use and for the protection of your
own safety. Therefore please read this very carefully.
When passing this device to a third person, these
instructions must be handed out, too.
Retain this user manual and all other literature
supplied with your device for any future reference.
model
TOOL
BATTERY
CRHM-14.4L
230V / 50Hz
Comply with the safety information and the warning
on the appliance.
Be familiar with the controls and the proper use of
the appliance before attempting to operate it and
above all, make sure you know how to stop it in case
of emergency.
Following these simple instructions will also
maintain your device in good working order.
• The appliance must be assembled correctly
before use.
• Only use the appliance for its designed
purposes.
• In addition to the design of the device there are
safety decals that must be considered and indications
about the safety equipment to use. Accident
prevention is dependent upon the awareness,
common sense, forethought, and proper training
8
14,4
0 - 900
0 - 6000
10
8
10
80.3
91.3
3
5.671
1,3
Li-Ion
1,3
4
3 - 5