How To Detach The Stand And The Base - BenQ XL Series User Manual

How to detach the stand and the base

1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing the
screen surface on an object like a stapler or a mouse will crack
the glass or damage the LCD substrate voiding your warranty.
Sliding or scraping the monitor around on your desk will scratch
or damage the monitor surround and controls.
2. Remove the monitor stand.
While pressing and holding the VESA mount release button
1
( ), detach the stand from the monitor (
3. Remove the monitor base.
Raise the thumbscrew lids and release the thumbscrews as
illustrated.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base and monitor stand
somewhere safe for future use.
Turn the base clockwise until you cannot go further.
As illustrated, when the stand and the base are unlocked,
the arrow on the end of the stand is aligned to the arrow
on the monitor base.
And then detach the base from the stand.
2 3
and ).
17
3
1
2