How To Assemble Your Monitor Hardware - BenQ XL Series User Manual

How to assemble your monitor hardware

• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on the
purchased model.
• Avoid finger pressure on the screen surface.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse
will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on
your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
Orient and align the stand base socket with the end of the
stand arm. Make sure to align the arrow on the end of the
stand to the one on the monitor base.
Turn the base counterclockwise until you cannot go further.
As illustrated, when the stand and the base are locked, the
arrow on the end of the stand is aligned to the lock symbol
on the monitor stand.
Raise the thumbscrew lids and tighten the thumbscrews as
illustrated. Then push the lids back.
12