Run the Remove Print Smears procedure:
■
a.
Select Troubleshooting, and then press the OK button.
b.
Select
Print Quality
c.
Remove Print
Select
run through the printer.
d.
Repeat the previous step until no toner appears on the pages.
Repeating Defects
Problem
Marks or voids are regularly repeated on a page.
Solution
Print the Repeating Defects page to view instructions for correcting the problem. To print the
Repeating Defects page:
1.
On the control panel, select Troubleshooting, and then press the OK button.
2.
Select
Print Quality
3.
Select
Repeating
Defects, and then press the OK button.
The Repeating Defects page prints.
4.
Follow the instructions on the page to measure the distance between the defects and
identify the item causing the defects.
Problems, and then press the OK button.
Smears, and then press the OK button. Three cleaning pages
Problems, and then press the OK button.
Phaser® 6300/6350 Color Laser Printer
4-6
Solving Print-Quality Problems