Quick Step Overview - Xerox DocuPrint Network Laser Printers Information Manual

Quick Step Overview

1 Configure the DocuPrint printer for use on an EtherTalk
network from the Control Panel (if necessary). See
page 5-5
for step-by-step instructions.
2 Install the DocuPrint Macintosh Driver per the
instructions provided in the section
Installation" (page 5-4)
3
Select DocuPrint printer and zone (if used) in the Chooser.
4 Print a one-page job from your software application.
5 If you are not able to print, consult the section
"Macintosh Troubleshooting" (page 5-8)
information on your network configuration.
Chapter 5: Macintosh Network Setup

Quick Step Overview

"Macintosh Driver
.
for
5-3