Windows 95/98 Peer-To-Peer Network (Peer-Ro-Peer Ipp); Requirements; Step-By-Step Setup (Peer-To-Peer) - Xerox DocuPrint Network Laser Printers Information Manual

Windows 95/98 Peer-to-peer
Network (Peer-ro-Peer IPP)

Requirements

Step-by-Step Setup
(Peer-to-Peer)

Windows 95/98 Peer-to-peer Network (Peer-ro-Peer IPP)

• A printer with appropriate cabling connected to your
network.
• A workstation with Windows 95/98 software and the
Microsoft IPP Client for Windows 95/98 installed.
The Microsoft IPP Client can ve down-
loaded from the Microsoft Corporatio web site.
• A working knowledge of Windows 95/98
1 Print a Configuration Sheet. Details are in
Chapter 2: Connecting to Your Network
Configuration Sheet" (page 2-21)
reference.
2
Check the Configuration Sheet and verify that the IPP
protocol is enabled and note the IPP print queue name.
3 Load your DocuPrint CD.
4 Run the CD Navigator on your DocuPrint CD-ROM (run
setup32.exe). Select your language. Select "Install Printer
Drivers." Follow the instructions on the screen.
5
Restart your PC.
6 Select the Start button, select Settings, select Printers.
7 Select the printer model you just installed.
8 Select File, then select Properties.
9
Select Add Port. . .
10
Select Network and then enter the IPP print qurur name,
including the URL, in the network path field, click OK.
11 Back in the properties for the printer, select General and
click Print Test Page.
Chapter 4: Windows / Peer-to-Peer Network Setup
"Print the
,
. Retain this page for
4-11