Static Addressing
The printer is assigned a TCP/IP address by a network
administrator. The address can be set at the control panel
or by using ARP and telnet commands.
If you use the Xerox CentreDirect External Print Server
(External Ethernet Adapter) to connect your printer to the
network, you cannot use the control panel to set a Static IP
Address. Use the ARP and telnet procedures that are described
in the sections for Windows or Unix Operating Systems.
Setting from the Control Panel
Perform these steps to set the Static IP Address at the
control panel:
1
Press Menu Up or Menu Down until you see:
M e n u s
E t h e r n e t M e n u
2
Press Item Up or Item Down until you see:
E t h e r n e t M e n u
I P A d d r e s s R e s .
3
Press Value Up or Value Down. You will see:
I P A d d r e s s R e s . =
S t a t i c
4
Press Enter. You will see:
E t h e r n e t M e n u
I P A d d r e s s R e s .
5
Press Item Up or Item Down until you see:
E t h e r n e t M e n u
I P A d d r e s s
Chapter 2: Connecting to Your Network
Set An IP Address
2-7