GE NetworX Series Manual page 8

Step 3 You may toggle (reverse) the bypass condition of a
particular zone. After that zone number is stated, press
0
.
Step 4 The "Operator" will say "PLEASE WAIT" before
repeating the status of that zone, and continue scrolling
through the remaining zones.
Step 5 Press a zone number followed by # to proceed directly
to that zone number.
For example, to go to zone 9 you would press 9
Step 6
Press # to exit the Zone Bypass section of the MENU.
Section VII. A
When the "Operator" is on the line, the Zone Status option of the MENU
can be reached by performing the following steps:
Step 1 ρ
Press
The star [ρ] key accesses the main MENU and the zero
[0] accesses the Zone Status information.
Step 2 The "Operator" will state the name(s) of any zone(s) and
their conditions with one of the following messages:
# "ZONE 1 IS OPEN. TO BYPASS, ENTER [ρ] NOW"
# "ZONE 1 IS BYPASSED"
# "FIRE, ZONE 1"
# "FIRE TROUBLE, ZONE 1"
# "TAMPER, ZONE 1"
Z S
CCESSING ONE TATUS
0
.
# .