Setting Up Postscript Printing With Windows Nt 4.0 - Xerox DocuColor 40CP Getting Started Manual

22 Installing User Software on a Windows Computer
9. In the Available queues list box, select the server and queue name that correspond to
the DocuColor 40 CP.
10. Click the Capture button, then click the Close button.
The Connect dialog box is displayed with the network path to the DocuColor 40 CP.
11. Click OK in the Connect dialog box.
The Printers window appears again, with the selected port next to the selected printer
name in the Installed Printers list box.
12. Click Close in the Printers dialog box.
You are now ready to print to the DocuColor 40 CP from Windows applications.
When you select Print, jobs are routed to the print queue on the NetWare file server,
and then transmitted to the DocuColor 40 CP. The network administrator should
verify the network connection by printing a test document from each networked
computer that will use the DocuColor 40 CP.

Setting up PostScript printing with Windows NT 4.0

To set up Windows NT 4.0 printing, install the Adobe PostScript printer driver and
configure printing for your network type. DocuColor 40 CP printer files support
Intel-based Windows NT 4.0.
You can use the following procedure whether you are installing from the User Software
CD or with installer files downloaded using the Installer WebTool.
T A P
O INSTALL THE DOBE OST
W NT 4.0:
INDOWS
1. If you are installing from the CD, insert it into the CD-ROM drive, double-click the icon
of the CD, and open the English\Instalrs\Ps_drvr folders.
If you are installing from the files you downloaded using the Installer WebTool,
double-click the icon of your hard disk drive, and open the Prntdrv\Ps_drvr folders.
2. Open the Win_nt4x folder, and double-click the Setup.exe icon.
3. Read the End User License Agreement. If you agree with the terms and conditions of
the agreement, click Yes.
S
CRIPT PRINTER DRIVER FOR