Xerox Digital copier printers User Manual page 83

6
6-5 Understanding calibration
T X-R DTP32:
O CONNECT THE ITE
1. Plug the square end of the interface cable (like a modular phone plug) into the I/O
port on the side of the X-Rite DTP32.
2. Attach the round 8-pin mini-connector to the modem port on the back of your
Macintosh. Or attach the 9-pin connector to the COM1 or COM2 port on your PC. Or
attach the 9-pin connector to the serial port on the back of the Fiery SI.
Server Macintosh PC
Square connector