Safety Warnings; Cleaning The Fiery Si; System Requirements For Macintosh Users - Xerox Digital copier printers User Manual

For xerox digital copier printers

Table of Contents

xiii Safety warnings

Safety warnings

The Fiery SI display window is a liquid crystal display (LCD) that is made of glass and

can break. Do not subject it to strong shocks.

If the display window breaks and the liquid crystal material leaks out, do not inhale,

ingest, or touch it. If the material gets on your skin or clothing, wash it off with soap

and water immediately.

Do not touch or put pressure on the panel. This will change the color of the panel.

Clean the Fiery SI with a soft cloth moistened with isopropyl alcohol or ethyl alcohol.

Never use water or ketone as these may permanently alter the display.

For installation of user software, you need A CD-ROM drive. This can be either an

internal CD-ROM drive in your Macintosh or an external drive with the appropriate

cable and software to run on your computer.

To use the Fiery SI with a Macintosh computer, you need:

• Any Macintosh computer in the Macintosh II, Quadra, Centris, Performa, or Power

Macintosh families that has at least 4MB of RAM and EtherTalk

• Apple System software version 7.0 or later

• Adobe

PostScript

driver version 7.0 or later; and PPD (PostScript Printer Description) ﬁles

(The current version of the Adobe PostScript Printer Driver and the PPD ﬁles are

included with the Fiery SI User Software.)

• To use Fiery XJ Scan

• To use the paging feature of Fiery XJ Spooler, an alphanumeric pager and

PageNOW! software version 1.5 or later. PageNOW! is available from Mark/Space

Softworks: 1-800-799-1718. (United States and Canada only)

Printer Driver version 8.0 or later, or Apple

™

, Adobe Photoshop

version 2.5 or later

Phase 2 installed

LaserWriter

Table of Contents