Starting And Shutting Down The Fiery Si; Starting The Fiery Si - Xerox Digital copier printers User Manual

1
1-7 Using the Control Panel
Power switch in the
off position

Starting and shutting down the Fiery SI

Generally, you can leave the Fiery SI running all the time. This section describes how
to shut down and restart the Fiery SI when necessary.

Starting the Fiery SI

To start the Fiery SI, move the switch on the rear of the Fiery SI to the On position.
Diagnostic messages appear on the Control Panel. If any diagnostics fail, more
information and instructions appear. Contact your service representative if the Fiery SI
encounters problems while running the diagnostics.
When the diagnostics are finished, the following message is displayed:
For software update or setup press any key
If you want to change the Setup options, press one of the buttons; if you do not press a
button, the Fiery SI continues starting up and displays the message
ready to receive data.
when it is
Idle