Data Contents Of Audit Trail - VeriFone Vx520 Implementation Manual

5. Select "Send TCP SYSLOG"
6. Select "Real-Time send"
7. Enter IP address for Audit Trail Log Server
8. Enter PORT number
9. Verify if terminal succeeds to connect and send by selecting "Send once"
On Integrated Solution:
1. Select MENU
2. Enter Menu Access Password
3. Select 'Functions'
4. Select 'Log Menu'
5. Select 'A-Log' (Audit Trail)
6. Select "Send TCP SYSLOG"
7. Select "Real-Time send"
8. Enter IP address for Audit Trail Log Server
9. Enter PORT number
10. Verify if terminal succeeds to connect and send by selecting "Send once"
Once A-LOG in SYSLOG format is activated, all information of major events will be transferred to
your designated server as soon as terminal will go out in IDLE (NEW CUSTOMER screen). Terminal
will keep theses settings even after power loss or reboot.
Important:
•
SysLog is sent in TCP message instead of UDP. Make sure your SysLog server supports it.
•
SysLog is based on standard internet protocols as specified by RFC 3164 and RFC 3195.

5.2. Data Contents of Audit Trail

The format of the terminal log file needed to meet the PCI DSS requirement 10, "Track and monitor
all access to network resources and cardholder data", described in PCI Requirements and Security
Assessment Procedures Version 3.0.
© 2015 VeriFone. All rights reserved. VeriFone, the VeriFone logo, Vx, Mx, VeriCentre, VeriShield, Verix V, Verix and PAYware are either
trademarks or registered trademarks of VeriFone in the United States and/or other countries. All other trademarks or brand names are the
properties of their respective holders. All features and specifications are subject to change without notice.
The information contained in this document is confidential and property of VeriFone, Inc. This material may not be copied or published, or
divulged in part or in totality without written permission form VeriFone, Inc.
Author
Jevgenijs Smirnovs
E-mail
jevgenijs.smirnovs@verifone.com
Phone
+371 67844726
Document name Verifone Payment Core
Point VxPC F02.01.xxx
Implementation Guide
Date
12-Jun-2015
Page number Version
26 1.0