Technical Specifications - Graco Reactor H-25 Series Repair And Parts Manual

Technical Specifications

Technical Specifications
Reactor H-25, H-40, H-50, H-XP2, and H-XP3
Fluid Circulation Ports
Maximum Fluid Temperature
Hydraulic reservoir capacity
Amperage Requirement
Heater Power
(A and B heaters total, no hose)
Recommended hydraulic fluid
Sound power, per ISO 9614-2
Sound pressure, 1 m from equipment
Wetted Parts
Maximum fluid working pressure
Models H-25 and H-40
Model H-50 1 phase
Model H-50 3 phase
Models H-XP2 and H-XP3
Fluid:Oil pressure ratio
Models H-25 and H-40
Model H-50
Models H-XP2 and H-XP3
Fluid inlets
Component A (ISO)
Component B (RES)
Fluid outlets
Component A (ISO)
Component B (RES)
Maximum Output (10 weight oil at ambient temperature)
Model H-25
Model H-XP2
Model H-50
Model H-40
Model H-XP3
Output per Cycle (A and B)
Models H-25 and H-40
Model H-50
Models H-XP2 and H-XP3
Line Voltage Requirement
230V 1 phase and 230V 3 phase units
400V 3 phase units
72
US
1/4 npsm(m), with plastic
tubing, 250 psi maximum
190 °F
3.5 gal.
See Models, page 3.
See Models, page 3.
Citgo A/W Hydraulic Oil, ISO Grade 46
Aluminum, stainless steel, zinc-plated carbon steel, brass,
carbide, chrome, fluoroelastomer, PTFE, ultra-high
molecular weight polyethylene, chemically resistant o-rings
2000 psi
1700 psi
2000 psi
3500 psi
1/2 npt(f), 250 psi
3/4 npt(f), 250 psi
-8 (1/2 in.) JIC, with -5 (5/16 in.) JIC adapter
-10 (5/8 in.) JIC, with -6 (3/8 in.) JIC adapter
22 lb/min
1.5 gpm
52 lb/min
45 lb/min
2.8 gpm
0.063 gal.
0.073 gal.
0.042 gal.
195-264 Vac
338-457 Vac
Metric
1/4 npsm(m), with plastic
tubing, 1.75 MPa, 17.5 bar
88 °C
13.6 liters
90.2 dB(A)
82.6 dB(A)
13.8 MPa, 138 bar
11.7 MPa, 11.7 bar
13.8 MPa, 138 bar
24.1 MPa, 241 bar
1.91:1
1.64:1
2.79:1
1.75 MPa, 17.5 bar
1.75 MPa, 17.5 bar
10 kg/min, 60 Hz
5.7 liter/min, 60 Hz
24 kg/min, 60 Hz
20 kg/min, 60 Hz
10.6 liter/min, 60 Hz
0.23 liter
0.28 liter
0.16 liter
50/60 Hz
50/60 Hz
312063Z