Problem Solving; Jam Clearance - Xerox Trimmer Module SquareFold User Manual

Jam clearance

Clear any paper jams that may occur
along the paper path
12

Problem solving

Important!: The top covers cannot be opened during normal
operation or when the machine is idle. The covers can be
opened only when an indicator is lit (refer to page 4) and a
jam/fault occurs within the SquareFold Trimmer Module.
If a jam occurs, the machine stops printing a fault code
appears on the SquareFold Trimmer Module Control Panel,
and a message may be displayed on the User Interface (UI).
Note: If a message is displayed on the machine's UI, it will
always indicate a jam/fault within the finisher.
Tip: To determine if the jam/fault is within the finisher or
with the SquareFold Trimmer Module, always begin your
troubleshooting with the SquareFold Trimmer Module.
Use the following procedure to clear the jam or fault and
resume printing:
1. The Control Panel on the SquareFold Trimmer Module is
displaying a fault code and/or a fault indicator is lit:
• Yes: Continue to the next step of this procedure
• No: Refer to the machine's UI and clear any possible
finisher jam/fault.
Open the Top Left Cover and the Top Right Cover.
2.
SquareFold Trimmer User Guide