LG B30AWYN7G5A Manual page 45

Ceiling Concealed Duct
11. E.S.P.(External Static Pressure) setting for
How to Set E.S.P?
E.S.P function is setting the volume of each air flow. It is for the convenience of installation.
It is recommended that you should not use this function while using the wireless remote controller.
CAUTION:
If you set E.S.P incorrectly, the air conditioner may malfunction.
This setting must be carried out by authorized personnel only.
100 unit 10 unit
1. Press button to appear
screen. mode.
2. Press the button for
3secs.
3. Press the button.
4. Set the volume of each air flow
( LOW'MID'HI) by using the
Press the
button to select the air flow.
(The value of E.S.P could be adjusted from 1 to
255.) (The figure on the left shows when the
strong wind's E.S.P value has been set to 255.)
5. If you press the button, the E.S.P value will
be set.
button on the
button.
Inverter
50Hz/R410A
_ 35