Fitting; Place Of Installation - Siemens DELTA i-system 1,1 Komfort 5TC1 505 Operating And Fitting Instructions Manual

Available languages

Fig. 7

Fig. 8

3. Fitting

The motion detector attachments 'Komfort' are in an optimal

position for detecting movements if they are installed perpen-

dicular to the direction of walking (Fig. 7). In other positions, the

detection will be delayed.

To prevent undesired switching, the following instructions

should be observed during the installation (Fig. 8):

- Reflected heat radiation from lamps or due to insufficient

spacing between lamp and motion detector may cause

undefined switching.

- Select the place of installation so that there are no sources

of disturbance, e.g. lamps or radiators, in the detection

field. If this is not possible, use the snap-on mask (see use

of the snap-on mask under 3.3).

Table of Contents