Using Setip - Xerox Phaser 3300MFP User Manual

Using SetIP

1
From the Windows Start menu, select Programs or All
Programs your printer driver name
The program automatically detects and displays new and
configured print servers on your network.
2
Select the name of your printer and click
your printer name, click to refresh the list.
N
:
OTES
• To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn't show your printer, click
network printer card's Mac address, IP address, subnet mask,
default gateway, and then click Apply.
3
Click OK to confirm the settings.
4
Click Exit to close the SetIP program.
SetIP SetIP.
. If you cannot find
enter your
12
Using SetIP