Using Setip; Installing Setip - Xerox Phaser 3300MFP User Manual

2

Using SetIP

•

Installing SetIP

• Using SetIP
Installing SetIP
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing "X" with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
3
Click Install SetIP Utility(Optional).
4
Click Next.
5
Click Next.
6
Click Finish.
11
Using SetIP