PRESONUS ATOM SQ Owner's Manual page 22

3 Advanced Studio One Integration
3.2 Screen Controls
3.2.1.2 Instrument Track Editing Controls
3.2.1.3 Performance Configuration
Page Up to access the Track Editing Controls. From here you
can add Parts and Patterns, Chorder FX, and more.
1 2 3
Add Add Merge
Chorder FX Arp FX Events
Track
Synth Lead
Add Add Double
Pattern Part Part
6
4 5
1. Add Chorder FX. Loads a Chorder Note FX onto the selected track.
2. Add Arp FX. Loads an Arpeggiator Note FX onto the selected track.
3. Merge Events. The currently selected Events will be merged together.
4. Add Pattern. Adds a one-bar Pattern Event at the current playhead position.
5. Add Part. Adds a one-bar Instrument Part Event at the current playhead position.
6. Double Part. Duplicates the current Event and merges the two
Events together. Note: If this command is used on a Pattern
Event, the Pattern will be converted to an Instrument Part.
Page Up again to access the Performance Configuration page. This page lets
you adjust the controls on your ATOM SQ to suit your performance needs.
1 2 3
Strip +/- Note
Modwheel Pitchbend Repeat
Performance
Synth Lead
Rate Gate Pressure
1/16 100%
6
4 5
1. Strip. Select Strip to use the Screen Encoder to change
the function of the Touch Strip as follows:
• Pitchbend. The Touch Strip will be assigned to the Pitch
Bend MIDI control and always reset back to center on
release, indicated by the red LEDs above the strip.
ATOM SQ
Owner's Manual
20