PRESONUS ATOM SQ Owner's Manual page 12

2 Standard Controller Mode
2.8 Screen Controls
2.8.1.2 Arpeggiator
Press the right arrow button below the Screen Encoder to
navigate to the Arpeggiator Page. Please note: Arpeggiator Mode
will only remain engaged while on the arpeggiator page.
1 2 3
Mode Swing Clear
Up 0% Sequence
Arpeggiator
Off 1/16 1
Arp Rate Octaves
6
4 5
1. Mode. When selected, the Screen Encoder changes
the Play Mode for the Arpeggitator.
• Up. The arpeggio starts at the lowest held note and travels upward through
the held notes, then returns to the lowest note as the arpeggio begins again.
• Down. The arpeggio starts at the highest held note and
travels downward through the held notes, then returns
to the highest note as the arpeggio begins again.
•
Up/Down. The arpeggio starts at the lowest held note,
travels upward to the highest, then travels back down to
the lowest note, and the arpeggio begins again.
•
Down/Up. The arpeggio starts at the highest held note,
travels downward to the lowest, then travels back up to
the highest note, and the arpeggio begins again.
• Random. The arpeggio plays the currently held notes in a random pattern.
•
Chord. The currently held chord (or single note)
is repeated as long as it is held.
• Input. The arpeggio pattern is derived from the
order in which notes are played and held.
2. Swing. When selected, the Screen Encoder will adjust the
amount of Swing that is applied to the sequence.
3. Clear Sequence. Stops a held sequence.
ATOM SQ
Owner's Manual
10