Xerox CX PRINT SERVER 550 User Manual page 107

Imposition tab in the job parameters window
Parameter
Creep
Option Description
Bleed ●
●
●
The value that you enter depends on the paper size and
imposition method that you choose. You can select
Maximum bleed or enter a size for Custom bleed size.
Notes:
●
●
? Enables you to view help on spacing and marks.
Preview Enables you to view your imposition layout and settings. You
can open the Preview window at any time and keep it open
to check your imposition settings as you select them. The
Preview window dynamically reflects any changes that you
make.
Creep Creep is used to compensate for the physical shift of the
inner sheets of a saddle stitch booklet. Set the size of the
page shift from or towards the spine.
Provides the following options:
●
●
Note: This is only available with Saddle stitch.
Preview Enables you to view your imposition layout and settings. You
can open the Preview window at any time and keep it open
to check your imposition settings as you select them. The
Preview window dynamically reflects any changes that you
make.
Extends part or all of the printed image beyond the
trimming boundary.
Ensures that an inaccurate trim setting will not leave
undesired white space at the edge of the page.
Produces sharp page boundaries with color that extends
all the way to the edge of the page.
You cannot extend the bleed beyond the sheet fold lines.
Bleed does not affect the position of a crop.
Bleed must be defined in your DTP application in order
for the CX print server to be able to apply bleed options.
Creep in
Auto—Automatically sets a value based on the
●
paper's weight.
● Custom—Enables you to set a custom creep in
value.
Creep out—Enables you to set a creep out value.
97