Changing The Default Time Settings - Xerox CopyCentre C118 Quick Reference Manual

Sleep Mode
The machine automatically switches to the Sleep Mode after the Low Power Mode
continues for a specified period of time. The Sleep Mode has a reduced power
consumption compared to the Low Power Mode. In this mode, the screen is turned off,
and the Power Saver light is on. The Sleep Mode is cancelled when the <Power Saver>
button is pressed, or a fax or print job is received by the machine. The factory default
setting of 1 minute is customer changeable within the range of 1 to 239 minutes.
For more information, refer to Power Saver in the Setups chapter on User Guide.

Changing the Default Time Settings

This section describes how to change the default time settings such as Auto Clear,
Power Saver, and Scanning Timer. For more information, refer to Timer Settings in the
Setups chapter on User Guide.
1.
Press the <Log In/Out> button on the
control panel.
2.
Select [System Settings] using the
<Select> button.
3.
Enter the Key Operator password using
the numeric keypad on the control
panel.
NOTE: The default Key Operator password is "11111".
4.
Select [Confirm] using the <Select> button, or press the <Enter> button.
5.
Select [Common Settings] on the
[System Settings] screen using the
<Select> button.
6.
Press the <Enter> button.
7.
Select [Timer Settings] on the [Common
Settings] screen using the <Select>
button.
8.
Press the <Enter> button.
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide
Changing the Default Time Settings
<Log In/Out> button
33