Table of Contents
Advertisement
Operation
Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 11)
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid
down in EN 50110-1 regarding safe operation of electrical equipment.
8.1
Safety instructions for operation
8.1.1
Safe handling
Workplace safety depends on the attentiveness, care, and common sense of the personnel
who install, operate, and maintain the machine. In addition to the safety measures cited, as a
matter of principle, the use of caution is necessary when you are near the machine. Always
pay attention to your safety.
Also observe the following to prevent accidents:
● General safety regulations applicable in the country where the machine is deployed.
● Manufacturer-specific and application-specific regulations
● Special agreements made with the operator
● Separate safety instructions supplied with the machine
● Safety symbols and instructions on the machine and its packaging
Live parts
Electric machines contain live parts.
Fatal or severe injuries and substantial material damage can occur if the covers are
removed or if the machine is not handled, operated, or maintained properly.
• Always observe the "five safety rules" (Page 12) when carrying out any work on the
• Only remove covers in the manner described in the operating instructions.
• Operate the machine properly.
• Regularly and professionally maintain the machine according to the instructions
1MB155 / 1MB555
Operating Instructions, 03/2018, A5E41926185A
WARNING
machine.
provided in the "Maintenance" (Page 113) chapter of the operating instructions.
8
93
Advertisement
Table of Contents
