Table of Contents
Advertisement
should be replaced only by authorized service or modification partners.
Standardized parts
Standardized parts are machine parts obtained from free trade outlets in accordance with
their necessary dimensions, materials and surface finish. A detailed list can be found in the
"Standardized parts" section.
Other parts
Other parts are small parts required to complete the exploded drawing. However, these parts
cannot be supplied as individual spare or repair parts. The delivery in assembly units (e.g.
complete terminal box) is possible on request.
The following supply commitments apply to replacement machines and repair parts following
delivery of the motor:
● For up to 3 years after the delivery of the original machine, in the event of total machine
failure, Siemens will supply a comparable replacement machine with regard to the
mounting dimensions and functions; it is possible that this will involve a new series.
● If a replacement machine is supplied within the 3 year period, this does not mean that the
warranty restarts.
● Replacement machines delivered after the active production of the machine series are
also identified as spare motors on the rating plate.
● Spare parts are offered only for these spare motors on request; repair and replacement
are not possible.
● After a period of 3 years (after the delivery of the original machine), it is only possible to
repair these machines (depending on the availability of the spare parts required).
● For up to 5 years after the delivery of the original motor, spare parts will be available and
for a further 5 years, Siemens will provide information about spare parts and will supply
documents when required.
1MB155 / 1MB555
Operating Instructions, 03/2018, A5E41926185A
Spare Parts
10.6 Parts groups definition
127
Advertisement
Table of Contents
