Fm Display Modes; Recalling A Stored Station - Hitachi AXM860E Instruction Manual

Recalling a Stored Station

1. Once you have saved a station to one of the preset stations, you can recall it by
pressing the ID3/iPod/MEM/C-ADJ. button.
Press the SKIP/TUNE SEARCH
2.
number.
Press the ID3/iPod/MEM/C-ADJ. button to confirm the selection.
3.
GB
• The stored stations will be saved into the memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location
• While the unit is in Standby mode, press and hold the STOP/MENU/INFO
preset memory and restore to factory setting.

FM Display Modes

Every time you press the STOP/MENU/INFO
following display modes: Signal Strength, Frequency, Audio Mode.
Signal Strength
The display will show a slide bar to indicate
the signal strength, the stronger the signal, the
longer the bar will be from left to right.
Frequency
This shows the frequency of the current station.
Audio Mode
When in FM mode, the display will show if the
station being received is in mono or stereo.
The receiver will automatically switch between
Stereo and Mono in Auto mode selected. You
can however override this function, so that you
can manually switch to Mono mode, which is
helpful if you're listening to a poor FM signal.
22
buttons to select your desired preset station
button, the display will cycle through the
Signal Strength
Frequency
Audio Mode
button to erase all